Text Questions Set Appointments

650-906-9403

866-670-1239

Bona DTS Deep Tone Sealer Product Description:

When putting in a hardwood floor, it helps to have the right tools. Bona DTS Deep Tone Sealer offers to seal the wood of your floor, giving a natural yet vibrant look, along with the durability to stand the test of heavy traffic. Finishing with this waterborne sanding sealer will also ensure that the wood surface isn’t penetrated and that you get a finished product you can be proud of.

Bona DTS Deep Tone Sealer Recommended Uses:

One to two coats of Bona DTS is recommended for floors under traffic in residential and commercial areas.

Physical characteristics of Bona DTS Deep Tone Sealer:

Ingredients- Water, polymeric resin, silica derivate, diethylene glycol monoethyl ether, and propylene glycol
Color- Milky white when wet
pH level- 7.5 to 7.9
Solids – 31 to 32%
Viscosity – (Brookfield, 25C˚) 21 to 24 cP
Density - 8.66lbs/gallon (1.04 S.G.)
VOC Compliant - Product has maximum VOC content of 250 grams per liter (2.1 pounds per gallon VOC).
Gloss Level - N/A
Odor - Non-offending
Flashpoint - ->200˚F
Packaging – 1-gallon plastic bottle

Application characteristics of Bona DTS Deep Tone Sealer:

Clarity - Dries clear
Leveling - Excellent
Drying Time - 2 to 3 hours
Maximum Cure – 100% after one week
Coverage – 450 to 600 square feet per gallon
Defoaming – Excellent
Percent Cured After 24 Hours: N/A

Application Procedure of Bona DTS Deep Tone Sealer:

Before applying Bona DTS Deep Tone Sealer, shake can well. Apply one to two coats of Bona DTS before applying two coats of Bona waterborne floor finish. To ensure application goes smoothly and produces the desired results, be knowledgeable about the instructions included on the container. It’s best to test a board before use to make sure it produces a satisfactory end result with the floor.

Recommended Application Tools: Bona Floor Coater, Bona Roller and Bona Cut-In Pad

If you have further questions about the Bona DTS application process, call Bona at 800-872-5155.

Installation and maintenance of hardwood floors does not have to be difficult. If you live in the state of California and are looking to acquire these services at a price friendly to your budget, give Oakland Wood Floors a call. You can also use our hardwood calculator to get a quote on how much it will cost to put your work into our hands. As a licensed member of the NWFA, we will take care of it all for you using a dust-free sanding and finishing process, along with proven products, like Bona DTS. Don’t take our word for it. Peruse our numerous customer testimonials, and you will see that hiring us for all your hardwood floor needs is a step in the right direction. Call us for more information at 866-670-1239.

Bonaseal Product Description:

In Bona family of waterborne products, Bonaseal acts as the foundation on wood floors. In doing so it seals the wood, minimizing grain raise and preventing any finish from getting under the wood’s surface. Ensuring hardwood floors remain in top condition for as long as possible means using a strong foundation — that’s Bonaseal

Bonaseal Recommended Uses:

Bonaseal should be used on floors in both residential and commercial zones. It can should also be used on newly sanded floors to ensure a proper seal is placed on the wood.

Physical characteristics of Bonaseal:

Ingredients- Water, acrylic resin, dipropylene glycol monomethyl ether, defoamers.
Color- Milky white when wet
pH level- 7.8
Solids – 36%
Viscosity – (#4 Ford cup @ 25˚ C) approx. 12 seconds
Density - 8.7lbs/gallon (1.04 S.G.)
VOC Compliant - Product has maximum VOC content of 100 grams per liter (.85 pounds per gallon VOC).
Gloss Level: N/A
Odor - Non-offending
Flashpoint - ->200˚F
Stability – 1-year shelf life in unopened container
Packaging – 1-gallon plastic bottle

Application characteristics of Bonaseal:

Clarity - Dries clear
Leveling - Excellent
Drying Time - 2 to 3 hours
Maximum Cure – 100% after one week
Coverage – 500 to 600 square feet per gallon
Defoaming – Excellent
Percent Cured in 24 Hours: N/A

Application Procedure:

Following the detailed application process, along with the recommendations, on the back of the Bonaseal are key in ensuring that you get the proper results from your product. It may also be beneficial for you to test the product on a single board separate from the floor to make sure it produces the results you desire.

Before applying Bonaseal, shake can well. Proceed to apply 1 coat of Bonaseal, followed by two coats of Bona waterborne finish. Use clean applicator for finish application.

Recommended Application Tools: Bona Floor Coater, Bona Roller and Bona Cut-in Pad

If you have further questions about the Bonaseal application process, call Bona at 800-872-5155.

As an NWFA member and a licensed expert in hardwood floor installation in maintenance, Oakland Wood Floors know how important it is to have a floor you can brag about. Using our hardwood calculator, you can instantly get a quote telling you how much it will cost to have something this beautiful as part of your home. You may be surprised at the low prices we offer to come in and use our dust-free sanding and finishing, along with products like Bonaseal to give you beautiful floors. We also welcome you to read the numerous customer testimonials, testifying to our skill and dependability when it comes to hardwood floors. Getting started may be just a phone call away! Call us at 866-670-1239.

Bona DriFast™ Quick Dry Stain Product Description:

Anyone who has experienced laying down or refinishing hardwood floors knows it can be a long process. But professionals who want to get the job done not only right, but also in quick fashion, know to turn to Bona DriFast™ Quick Dry Stain. The technology behind this stain causes it to dry within two hours of application, allowing for the project to move forward.

Bona DriFast™ Quick Dry Stain Recommended Uses:

Bona DriFast™ Quick Dry Stain is recommended for use only on bare wood in preparation for a topcoat of Bona waterborne or any other Bona finish.

Physical characteristics of Bona DriFast™ Quick Dry Stain:
Ingredients- Wood tones: Oil-modified resins, mineral spirits (solvent), pigments, driers
White: Oil-modified resins, mineral spirits (solvent), Titanium Dioxide, fillers Color- Amber when wet
Solids – 35-40%
Viscosity – (#4 Ford cup @ 25°C) 13-18 seconds
Density - Wood tones: 7.2 - 7.5 lbs./gallon (0.86 - 0.90 s.g.), White: 8.7 -9.0 lbs./gallon (1.04 - 1.8 s.g.)
VOC Compliant - Product has maximum VOC content of 550 grams per liter (4.6 pounds per gallon VOC).
Odor - Mild solvent odor
Stability – 1-year shelf life in unopened container
Packaging – 1-gallon cans or 1-quart cans

Application characteristics of Bona DriFast™ Quick Dry Stain:

Clarity – Semi-transparent when dry
Leveling: Information unavailable
Drying Time - 2 hours to coat, 6 hours minimum for White, under ideal conditions
Coverage – 800-1,000 square feet per gallon
Defoaming: Information unavailable
Maximum Cure: Information unavailable
Percent Cured after 24 hours: Information unavailable

Application Procedure:

The application of Bona DriFast Quick Dry Stain is meant to penetrate, stain and seal bare wood in preparation of a Bona topcoat. To ensure the product is applied properly and produces the intended results, familiarize yourself with the detailed instructions on the back of the product and test a separate board before applying to the whole floor.

Apply Bona DriFast going with the grain of the flooring with recommended application tools. After allowing 1 to 3 minutes for penetration, wipe up excess stain with an absorbent, non-abrasive material. Allow to dry (2 hours for wood tones, 6 hours for white). First coat of sealant or finisher should be applied when stain is completely dry, but within 48 hours of its application.

Recommended Application Tools: Clean cloths, cut-in pad, brush.

If you have further questions about the Bona DriFast Quick Dry Stain application process, call 800-872-5155.

Stain Colors (Click to see larger preview)



Hardwood floors can be a home’s masterpiece if done correctly and maintained to the full extent. Trust Oakland Wood Floors with all your hardwood floor needs in California. We will offer our licensed services to you at a price you won’t be able to find anywhere else. Just look at all the customers who have given testimonials to that! To get started, use our hardwood calculator to see just how low our prices actually are and how easy it can be to get hardwood floors in your home today. As NWFA members, we will use an advanced, dust-free sanding and finishing process, in combination with quality Bona products — like Bona DriFast — to give you floors you can be proud of. For further information, call us at 866-670-1239.

Oil-Modified Finishes Product Description:

In order to look their best, hardwood floors must have a finish capable of giving it that amazing shine. Bona oil-modified finishes, like Woodline Polyurethane, have the ability to provide floors with a smooth top coat that enhances the wood’s natural color and protects it from everyday traffic.

Woodline Polyurethane Recommended Uses:

Bonaseal can be used on both commercial and residential floors. It is not recommended for use on floors with white or pastel stains.

Physical characteristics of Woodline Polyurethane:

Ingredients - Satin and Semi-Gloss: Oil-modified polyurethane resin, mineral spirits (solvent), driers,
silica.
Gloss: Oil-modified polyurethane resin, mineral spirits (solvent), alkyd resin, driers.
Color - Gold amber
pH Level – N/A
Solids – 43.5%
Viscosity (#4 Ford cup @ 25° C) - Gloss: approx. 20 seconds; Satin and Semi-Gloss: approx. 40 seconds
Density - Gloss: 7.3 lbs./gallon (.87 S.G); Satin and Semi-Gloss: 7.8 lbs./gallon (.94 S.G)
VOC Compliant - Does not exceed 510 grams per liter (4.3 pounds per gallon VOC)
Gloss Level - Gloss: (60°) >90; Semi-Gloss: 60; Satin: 30
Odor - Mineral spirits
Flashpoint - Satin and Semi-Gloss: 103° F; Gloss: 110° F
Stability – 1-year shelf life in unopened container
Packaging – 5 gallon pail, 1 gallon can or 1 quart can

Application characteristics of Woodline Polyurethane:

Clarity - Gloss: Clear; Satin and Semi-Gloss: Slightly opaque
Leveling - Good
Drying Time - 2 to 3 hours
Cure after 24 hours – 40%
Maximum Cure – 100% after two weeks
Coverage – 500 square feet per gallon
Defoaming - Excellent

Application Procedure:

The application process varies when using Bona Woodline Polyurethane depending on the age of the floor and what it has been previously treated with. Pay close attention to the directions on the back of the product to ensure quality results.

Before applying Woodline Polyurethane, remove the lid off the can and stir thoroughly with proper mixing tool. After preparing the floor, apply Woodline with proper application tool going with the grain of the wood. Feather out each stroke to minimize product buildup. Allow coat to dry completely before applying the second coat.

Recommended Application Tools: Lambs wool applicator, brush or snowplow tool

If you have further questions about this application process, call Bona at 800-872-5155.

Sometimes making the decision to install a new hardwood floor, or whether or not to do proper upkeep on it, is a difficult one. Let our licensed company make it easy for you. Using our hardwood calculator, you will be able to see just how little it can cost you to install a little bit of luxury into your home. Oakland Wood Floors’ dependable, experienced workers have been satisfying customers hardwood floor needs for a long time — just read our customer testimonials! As a member of the NWFA, we are eager to have you on board as one of our valuable customers so that we offer you services involving a dust-free sanding and finishing process, along with the use of products like Bona oil-modified finishes. Call us for more information at 866-670-1239.

Bona AmberSeal Product Description:

Prone to scratches and scuffs, wood floors with heavy traffic need coverage that keeps it looking brand-new. Bona’s AmberSeal offers to seal in a wood’s deep color in a way that is safe, environmentally sound and long lasting. This product is nonflammable, dries fast and GREENGUARD certified.

Bona AmberSeal Recommended Uses:

Bona AmberSeal comes recommended to be applied in 1 to 2 coats to floors in both residential and commercial zones.

Physical characteristics of Bona AmberSeal:

Ingredients- Water, polymeric resin, silica derivate, diethylene glycol monoethyl ether, and propylene glycol
Color- Amber when wet
pH level- 7.3 to 7.7
Solids – 30 to 31.5%
Viscosity – (Brookfield, 25C˚) 23 to 30 cP
Density - 8.68lbs/gallon (1.04 S.G.)
VOC Compliant - Product has maximum VOC content of 250 grams per liter (2.1 pounds per gallon VOC).
Odor - Non-offending
Flashpoint - ->200˚F
Stability – 1-year shelf life in unopened container
Packaging – 1-gallon plastic bottle

Application characteristics of Bona AmberSeal:

Clarity - Dries clear
Leveling - Excellent
Drying Time - 2 to 3 hours
Maximum Cure – 100% after one week
Coverage – 400 to 500 square feet per gallon
Defoaming – Excellent
Percent Cured After 24 hours – 70%

Application Procedure:

Applying Bona AmberSeal is a tedious, but worthwhile process. Follow the detailed instructions on the back of the product to ensure the seal is applied in the right manner to get the ultimate results. It is also just as important to maintain proper care after the application to keep floors looking their best.

Before applying Bona AmberSeal, shake the can thoroughly. Proceed to apply one or two coats of Bona AmberSeal to your floors before applying two coats of Bona Waterborne Finish.

Recommended Application Tools: Bona Floor Coater, Bona Roller and Bona Cut-In Pad

If you have further questions about the Bona AmberSeal application process, call Bona at 800-872-5155.

Having hardwood floors is a symbol of luxury. In hiring skilled experts from Oakland Wood Floors to install your floors using our dust-free sanding and finishing process, or just to help you maintain the floors you already have with proven Bona products like Bona AmberSeal, you will get outstanding service for a price that is easy on your wallet. Check out our hardwood floor calculator to see what it will cost, and we guarantee you’ll be blown away. We also welcome you to look at our customer testimonials. As a licensed member of the NWFA, we are the experts on hardwood floors in the state of California. Let us be at your service. Call us at 866-670-1239.